Heat Recovery Ventilation System (MVHR)

The ADM Heat Recovery Ventilation System provides an ideal ventilation solution. Not only are they energy efficient and highly reliable, they are also surprisingly affordable.

The principles of how a Heat recovery ventilation system (MVHR) works is simple: contaminated stale air is continuously replaced by warmed, fresh, filtered air. Importantly, a highly efficient heat exchanger is used to recover over 98% of the stale air’s heat and transfers it to the incoming air.

The end result is a high performance ventilation system that keeps your home supplied with clean, fresh air. Recovering and re-using existing heat also results in cost savings, whilst the fact that trickle vents aren’t necessary makes this system particularly suitable where planning regulations don’t allow for their use on buildings that have noisy neighbours such as major roads, railways etc.

So, if you would like to lower your carbon footprint, have a constant flow of fresh air, control condensation, increase your security and benefit from less noise then perhaps a heat recovery system is the solution for you.

"I just love the heat recovery system, for the energy saving yes, but most of all for the very reliable fresh air in the house, no wind needed!"

 ADM offer an unrivalled range of heat recovery systems suitable for most applications from a single room to large multi-use buildings. Quiet and compact they can be installed either horizontally or vertically, the motors are quiet and energy efficient.

 Contact ADM Systems for expert, independent advice on which system would best suit you.

"Our Heat Recovery Systems both extract stale air and circulate fresh, pre-warmed, filtered air throughout the building.

This is done without the security risk of open windows, annoying draughts or the use of noisy extractor fans and complies with Building Regulations."

Chris Marriott

Managing Director, ADM Systems

Benefits 

• Reduces your carbon footprint
• Lowers heating bills
• Improved energy/SAP rating
• Fresh filtered air circulated throughout
• Unpleasant smells removed
• No need to install noisy extractor fans
• No need to install trickle ventilators
• Reduces condensation and damage from moisture
• Reduces outside noise pollution
• Improved quality of life for asthma, eczema and hay fever sufferers
• Removes airborne dust
• No more draughts
• Improved security (windows can remain closed)

Read our Heat Recovery brochure for more information.

Summer Operation

In the summer months a bypass system allows fresh, filtered air to be introduced without being heated by the heat exchanger.

Ground to air heat exchanger

A ground to air heat exchanger works in conjunction with the heat recovery. It is ideal in the warm hot summer months or the cold winter months, as it draws air through an underground network of pipes. Find out more.....

For information on our individual products see our data sheets.